| power | dc |
| ip Rating | ip20 |
| device Type | safety Controller |
| in-series Diagnostics | yes |
| safety Module Type | base Controller |
| lcd Display | no |
| expandable | no |
| dimension (h X W X D In Mm) | 115 X 45 X 100 |
| relative Humidity | 90% @ 50â° C |
| max Operating Temperature ( °c) | 55 |
| input Operation | simultaneous Or Concurrent |
| number Of Safe Inputs | 10 |
| input Configuration | configurable |
| number Of Convertible Inputs | 4 |
| safety Input - Dual Channel (dry Contact) | 5-50 Ma @ 24 V Dc |
| safety Input - Dual Channel (solid-state) | 50 Ma @ 15 - 30 V Dc |
| safety Input - Reset | 5-50 Ma @ 24 V Dc |
| independently Controlled Safe Outputs | 2 |
| output Configuration | 2 Sets Of 3 No |
| non Safe Output Configuration | up To 4 Pnp |
| non Safe Output Rating | 80 Ma @ 24 V Dc (individual) Maximum; Overcurrent Protected |
| safe Output Rating | relay - 6 A |
| splittable Safe Output | no |
| mechanical Life (operations In Millions) | 20 |
| power Consumption | 0.24 A (no Load, Relays On), 0.53 A (full Load, Relays On) |
| response Time (ms) | see Software Configuration Summary |
| supply Voltage | 24 V Dc +/- 20% |
| terminal Type | spring Clamp |
| removable Terminals | no |
| vibration | 9-150 Hz At 1g Occasional/0.5g Continuous |
| electrical Life (cycles @ Va) | 50,000 @ Full Resistive Load |
| pl Rating | e |
| safety Category Rating | 4 |
| sil Rating | 3 |
| sistema | pfhd = 5.0 X 10-10 |
| thc Rating | iiic |
| safety Input - Single Channel | 5-50 Ma @ 24 V Dc |
| input Resistance | 150 Ω Max. Per Lead |
| e-stops/rope Pulls | yes |
| safety Mat | yes |
| motor Speed | no |
| Two-hand Controls | yes |
| muting | yes |
| gate Switch (nc/nc) Input | yes |
| gate Switch (nc/no) Input | yes |
| gate Switch (ossd) Input | yes |
| light Curtains/scanner With Edm Input | yes |
| light Curtains/scanner Without Edm Input | yes |
| ethernet/ip | yes |
| modbus/tcp | yes |
| pccc | yes |
| profinet | yes |
| recovery Time | 250 (typical), 400 (max) |
A technical overview of overvoltage risks in industrial systems and protection methods developed by Das Company.
Detailed technical overview of common drive fault codes, root causes, and systematic troubleshooting methods for industrial drive systems.
Learn how to calculate the correct cable cross-section for electrical panels to ensure safety, efficiency, and compliance with electrical standards by DAS Company Engineering.
Tripp Lite power solutions, part of Eaton’s portfolio, are widely used in industrial and B2B environments to ensure reliable power distribution, backup, and connectivity.
Hensel junction boxes are widely used in industrial electrical installations where safety, protection, and long-term reliability are essential. This article explains their role in modern B2B and industrial projects.
Siemens Solid Edge is a powerful industrial design and engineering software used in digital manufacturing and automation projects. This article explains how Solid Edge supports modern industrial workflows and engineering teams.
APC UPS systems from Schneider Electric are essential for protecting industrial automation, control systems, and critical infrastructure against power interruptions and voltage instability.
ABB Robotics solutions play a key role in modern industrial automation by enabling precise, flexible, and efficient production systems. This article explains how ABB robotic technologies are used in real-world B2B manufacturing and automation projects across Europe.
