DAS Company is an authorized Cata distribution partner, stocking and supplying the complete Cata ventilation portfolio — bathroom and kitchen axial extractor fans (100 mm, 125 mm, 150 mm), centrifugal inline duct fans, decorative cooker extraction hoods, humidistat and PIR timer models, industrial axial fans and Cata hand dryers — to electrical contractors, HVAC installers, builders merchants and facility managers across Europe from our Bulgaria distribution base.
Cata has been manufacturing extractor fans in Torelló, Barcelona since 1947 and is one of Europe's leading ventilation brands, exporting to over 50 countries. The Cata B series axial bathroom extractor fans (100 mm, 125 mm, 150 mm duct diameter) cover all standard bathroom and WC extraction applications in residential and commercial buildings. Standard (STD) models switch on with the room light via the wall switch. Timer (TMP) models run for an electronically adjustable 3–15 minutes after the light is switched off — ensuring post-use extraction to prevent condensation and mould. Humidistat (HUM) models operate automatically when room relative humidity exceeds a user-set threshold (40–95% RH adjustable) — activating extraction in showers, laundry rooms and humid basements without requiring a separate wall switch. PIR (B-PIR) models include an infrared presence sensor and adjustable run-on timer — activating extraction automatically when the room is occupied, independent of lighting. All Cata bathroom fans carry IP-X4 water ingress protection, Class B thermal protection and CE marking for European bathroom zone installation in compliance with IEC 60364-7-701.
The Cata UC series centrifugal extractor fans (100 mm, 125 mm, 150 mm) provide higher static pressure performance than axial fans — enabling extraction through longer duct runs (up to 10–15 m equivalent duct length) without the airflow reduction that limits standard axial fans in ducted installations. The centrifugal impeller design generates significantly lower noise at equivalent airflow compared to axial fans — making the UC series the preferred choice for bedroom en-suites, living spaces and acoustically sensitive environments. UC-10 STD, UC-10 TMP and UC-10 HUM variants cover the same standard/timer/humidistat control options as the B-series axial range, allowing specification of the appropriate control version based on building use and client preference. The Cata EB inline centrifugal fan series (EB-25, EB-40, EB-60, EB-100) are designed for remote inline duct mounting — extracting from multiple rooms via a shared duct network with the fan unit mounted in the ceiling void, loft or plant room, eliminating noise transmission from the fan directly into the occupied space.
Cata's decorative cooker hood range covers chimney-style wall-mounted hoods (60 cm, 70 cm, 90 cm width) with stainless steel and glass finishes — providing extraction or recirculation modes with multi-speed fan control, LED lighting and washable aluminium grease filters. The S-900 and similar decorative series models include electronic touch controls, delayed stop timer and dishwasher-safe aluminium mesh grease filters with saturation indicator. Built-in (encastrable) cooker hoods integrate into standard 60 cm kitchen units — providing a concealed extraction solution for open-plan kitchens where a visible chimney hood is not preferred. All Cata cooker hoods comply with EN 60335-2-31 and carry CE marking for European kitchen appliance installation. Activated carbon recirculation filters (for ductless mode) and replacement grease filters are stocked as accessories.
The Cata B-23 (230 mm diameter, 825 m³/h free air delivery) and B-30 (305 mm, 1,900 m³/h) industrial axial wall fans cover high-volume ventilation of workshops, warehouses, commercial kitchens, garages, basements and agricultural buildings requiring large air volume extraction at low static pressure. Operating temperature range of -20°C to +50°C covers both summer cooling and year-round ventilation in unheated industrial environments. The MATIC automatic blind closes when the fan is stopped — preventing cold draughts and pest ingress when extraction is not required. The RA reversible version with 5-speed adjuster enables both extraction and supply air modes — providing cross-ventilation capability through a single wall penetration in agricultural and industrial buildings. Glass installation kit is included as standard for wall or window-frame mounting without additional frame fabrication.
Cata's commercial hand dryer range covers surface-mounted and semi-recessed models for washrooms in offices, schools, restaurants, retail and public facilities. The Cata hand dryer range provides automatic infrared activation, adjustable drying time and stainless steel or ABS white/chrome finishes to match washroom interior specifications. Cata hand dryers comply with IEC 60335-2-23 and carry CE marking for European public facility installation. HEPA filter variants are available for healthcare environments where hygienic air filtration is required during the drying process.
DAS Company provides access to current Cata pricing for authorized B2B buyers across Europe. Product categories with available pricing include B-series bathroom axial fans (by duct diameter and control version), UC-series centrifugal fans (by diameter and control version), EB inline duct fans (by air volume), decorative and built-in cooker hoods (by width and finish) and commercial hand dryers. Contact our sales team for volume pricing, project quotations for new-build residential and commercial developments, and replacement filter and spare part enquiries.
