DAS Company is an authorized Enda distribution partner, stocking and supplying the complete Enda industrial control portfolio — ET and ETC series PID temperature controllers (48×48 mm to 96×96 mm panel format), rail-mounted process controllers with Modbus RTU and NFC parameterisation, digital timers and counters, solid-state relays (SSR), tachometers, humidity and temperature transmitters and Enda HMI panels — to machine builders, panel builders and industrial process engineers across Europe from our Bulgaria distribution base.
Enda, headquartered in Istanbul, Turkey, is Turkey's leading manufacturer of industrial control devices — specialising in PID temperature controllers, process controllers, digital timers, counters, SSR relays, tachometers and humidity instruments for the European industrial market. Enda operates through a carefully selected distributor network of technically capable partners — selecting only companies with proven engineering expertise to represent and support the Enda product range in each territory. This selective partnership model ensures that every Enda installation is supported by technically qualified application engineering, distinguishing Enda from mass-distribution instrument brands. Enda products carry CE marking and comply with IEC 61010-1 (safety requirements for measurement, control and laboratory equipment) for European industrial panel installation. Enda's controller range is distributed across Europe through specialist industrial automation distributors including Dacpol (Poland) alongside DAS Company (Bulgaria/Eastern Europe).
The Enda ET series covers the standard DIN panel-format PID temperature controller range in all common panel sizes — ET4420 (48×48 mm), ET7420 (72×72 mm), ET8420 (48×96 mm) and ET9420 (96×96 mm). All ET variants accept selectable PT100 RTD or thermocouple (J, K, L, T, S, R types) sensor input — covering the most common temperature measurement technologies in a single controller SKU. Output configuration covers SSR drive output (12V DC pulse, for zero-crossing solid-state relay control) and relay output (250V AC, 2A) simultaneously — enabling both proportional SSR control and high/low alarm relay switching from one controller without additional output modules. The Self-Tune PID function automatically calculates optimal P, I and D parameters by monitoring the process response during initial commissioning — eliminating the manual PID tuning process that requires specialist knowledge and time on each new installation. The Soft-Start function (adjustable 0–250 minutes ramp to setpoint) limits the rate of temperature rise during startup — preventing thermal shock damage to furnace linings, ceramic elements and process materials during cold-start conditions. The ETC4420 extends the ET range with NFC (Near Field Communication) parameterisation — allowing controller parameters to be written from a smartphone via the Enda mobile app without opening the panel door or connecting a programming cable, reducing commissioning and parameter change time on installed controllers.
Enda's 22.5×96 mm rail-mounted PID process controllers (4-input multi-channel variants) provide DIN-rail mounted process control for applications where panel-cutout space is exhausted or a DIN-rail controller format is preferred for panel organisation. The 4-channel rail controller accepts 4 independent selectable thermocouple or PT100 inputs with 4 independent SSR outputs — controlling 4 separate heating zones (oven sectors, mould zones, extrusion barrel zones) from a single DIN-rail device without 4 separate panel-mount controller cutouts. The integrated Modbus RTU communication (RS-485) enables remote setpoint adjustment, process value monitoring and alarm status reading from a PLC, SCADA or building management system without additional communication converters. The NFC parameterisation feature allows parameter templates to be stored on a smartphone and written to any compatible Enda controller by tapping the phone to the controller front — enabling fast commissioning of multiple identical controllers on a production line without manual parameter entry repetition.
Enda's digital timer range covers on-delay, off-delay, interval, cycle, pulse and star-delta timing functions in standard 48×48 mm DIN panel format and DIN-rail mounting variants. Supply voltage options (24V AC/DC and 100–240V AC) cover both 24V control panel and 230V direct supply panel timer applications from a single product range. The adjustable time range (milliseconds to hours) and front-panel time base selection cover both short-cycle production machine timing and long-interval process timing from the same hardware. Enda digital timers provide higher programming flexibility than electromechanical timer relays while maintaining the same DIN panel footprint — replacing analogue timer relays on a direct cutout-compatible basis in panel upgrades where improved timing accuracy or extended time range is required.
Enda panel-mount digital counters (48×48 mm, 48×96 mm and 96×96 mm) cover 6-digit and 8-digit count display with NPN/PNP pulse input, preset count output (relay) and count reset input for production counting, batch control and cycle counting applications. The Enda tachometer range (panel-mount and DIN-rail) measures rotational speed from proximity sensor, optical sensor or magnetic pickup inputs — displaying RPM, m/min or user-scaled process units with high and low limit relay outputs for overspeed and underspeed alarm functions in conveyor, motor and rotating machine monitoring applications.
Enda solid-state relays cover single-phase AC load switching (10A, 25A, 40A, 60A) in both panel-mount (screw-to-heatsink) and DIN-rail integrated formats for use as the output stage of ET series PID controllers in resistive heating and infrared lamp control applications. Zero-crossing switching (standard) and random-fire switching (for transformer and motor loads) variants are available. The Enda DIN-rail SSR module (with integrated heatsink and DIN-rail clip) provides a compact single-package SSR installation for lower-power heating zone control without separate heatsink mounting hardware. Enda panel-mount SSRs accept the 12V DC SSR drive output of ET series controllers directly — providing a complete matched controller + SSR system from a single manufacturer with guaranteed input-output compatibility.
Enda's humidity and temperature transmitter range provides combined RH% and °C/°F measurement with selectable 4–20 mA or 0–10V analogue output — compatible with all standard process controllers and SCADA analogue input cards. Wall-mount, duct-mount and panel-mount variants cover building HVAC, cleanroom, drying chamber and cold storage monitoring applications. The 72×72 mm panel controller variant combines humidity measurement, temperature measurement and fan relay output in a single panel cutout device — controlling HVAC fan and damper actuators directly from measured humidity and temperature without a separate PLC or BMS controller for single-zone dehumidification and temperature control applications.
DAS Company provides access to current Enda pricing for authorized B2B buyers across Europe. Product categories with available pricing include ET series PID temperature controllers (by panel size and output configuration), ETC series controllers with NFC, rail-mounted multi-channel process controllers (by input count), digital timers (by function and supply voltage), counters and tachometers, SSR relays (by current rating and mounting type) and humidity/temperature transmitters. Contact our engineering team for application-specific controller selection, Modbus communication configuration support and OEM volume pricing.
