DAS Company is an authorized Fluke distribution partner, stocking and supplying the complete Fluke test and measurement portfolio — 87V industrial digital multimeters, Ti400 thermal imaging cameras, 376 FC clamp meters, 1664 FC installation testers, 435-II power quality analysers and Fluke Connect wireless test tools — to maintenance engineers, electrical contractors and industrial test teams across Europe from our Bulgaria distribution base.
The Fluke 87V True-RMS Industrial Multimeter is the global industry standard for plant maintenance and industrial troubleshooting. The 87V provides 0.05% DC accuracy and 1 µA current resolution — sufficient for microprocessor circuit diagnostics alongside high-power industrial measurements. The 1000 µs peak capture function detects and holds transient signals down to 1 ms for intermittent fault diagnosis on variable speed drives, PLCs and motor control panels. The Low Pass Filter (LPF) mode eliminates drive output switching noise to give true fundamental frequency voltage readings on inverter outputs — essential for accurate measurements on Danfoss, ABB and Siemens VSD outputs. Input alert warns the user when test leads are inserted in the wrong socket before switching the rotary dial — preventing measurement errors in live industrial environments. CAT III 1000V and CAT IV 600V rated, with 10 A input for direct motor current measurement. The Fluke 279 FC combines a full-featured True-RMS multimeter with a built-in thermal imager — providing simultaneous electrical and thermal measurement for faster fault isolation on electrical panels.
The Fluke Ti400 thermal imaging camera provides 320×240 resolution (76,800 pixels) with 50 mK (0.05°C) thermal sensitivity and a temperature range of -20°C to +1200°C — covering electrical panel hot-spot detection, refractory lining inspection and metal processing applications from a single instrument. LaserSharp® Auto Focus uses a built-in laser distance meter to calculate target distance and automatically set focus — eliminating out-of-focus thermal images and the associated temperature measurement errors. IR-Fusion® technology blends visible light and infrared images in AutoBlend, Picture-in-Picture and full infrared modes for precise fault location identification within the thermal image. The 60 Hz frame rate version provides smooth video for tracking moving thermal targets and fast thermal transients. Interchangeable wide-angle (46°×34°) and telephoto lenses adapt the Ti400 for scanning large panels or detecting distant targets. Images sync directly to the Fluke Connect® app via WiFi for immediate report generation and sharing without PC connection. The Ti300 (240×180, 0.05°C NETD) provides the same LaserSharp focus and IR-Fusion at a reduced entry point for electrical maintenance teams.
The Fluke 376 FC True-RMS Clamp Meter measures AC/DC current up to 1000A with a 40 mm jaw — plus up to 2500A AC with the included iFlex flexible current clamp accessory for conductors and cable bundles that cannot be accessed by a rigid jaw. True-RMS measurement captures accurate readings on non-sinusoidal waveforms from variable speed drives, UPS systems and switched-mode power supplies. The Fluke Connect® wireless capability transmits live readings to a smartphone or tablet — enabling single-person measurement of inaccessible panel conductors without a second technician holding the meter. The 374 FC provides the same AC/DC 600A measurement with iFlex at a reduced price point for maintenance teams requiring multiple instruments. Both meters carry CAT IV 600V safety rating for use at the service entrance of industrial facilities.
The Fluke 1664 FC Multifunction Installation Tester performs all IEC 60364 and BS 7671 (18th Edition) electrical installation tests from a single instrument — earth continuity, insulation resistance (50V, 100V, 250V, 500V, 1000V), loop impedance (line-earth, line-neutral, line-line), RCD test (30 mA, 100 mA, 300 mA, 500 mA, Type A/AC/B), phase rotation and earth electrode resistance. The Wireless remote probe (included) eliminates the need for a second technician to hold a test lead at the distribution board during loop and RCD tests — reducing test time by up to 50% on large commercial installations. Fluke Connect® wireless uploads test results directly from the instrument to the Fluke Connect cloud system for EICR report generation without manual data entry. The 1663 (non-wireless) provides the same measurement capability at reduced cost for contractors who do not require wireless connectivity.
The Fluke 1587 FC Insulation Multimeter combines a 1000V insulation resistance tester with a full True-RMS digital multimeter — eliminating the need to carry two separate instruments for motor winding testing and general electrical measurement. Insulation test voltages of 50V, 100V, 250V, 500V and 1000V cover motor winding insulation (IEC 60034-1), cable insulation (IEC 60228) and transformer winding resistance test requirements. The 1 GΩ resolution at 1000V test voltage allows early detection of insulation degradation in high-voltage motors before breakdown failure. Dielectric Absorption Ratio (DAR) and Polarization Index (PI) test modes provide trending data for predictive insulation maintenance programmes on large motors and generators.
The Fluke 435-II Power Quality and Energy Analyser measures all power quality parameters simultaneously — voltage and current harmonics (up to 50th), voltage unbalance, flicker, voltage dips and swells, transients, power factor, true power (kW), reactive power (kVAR) and energy (kWh) on three-phase systems. The Energy Loss Calculator function quantifies the cost of power quality problems in currency per year — providing maintenance teams with the financial justification for power quality correction investments. Voltage Unbalance measurement is critical for identifying motor derating requirements under unbalanced supply conditions per IEC 60034-26. The Fluke 435-II is used for IEC 61000-4-30 Class A power quality surveys for utility compliance, EN 50160 supply quality verification and drive-related harmonic assessment studies.
DAS Company provides access to current Fluke pricing for authorized B2B buyers across Europe. Product categories with available pricing include 87V and 279 FC multimeters, Ti400 and Ti300 thermal imagers (by resolution and frame rate), 376 FC and 374 FC clamp meters, 1664 FC and 1663 installation testers, 1587 FC insulation multimeters and 435-II power quality analysers. Contact our sales team for volume pricing, instrument kit quotations and calibration service enquiries.
