DAS Company is an authorized Gedore distribution partner, stocking and supplying the complete Gedore professional tool portfolio — VDE 1000V insulated screwdrivers, spanners and sockets (EN 60900/IEC 60900), 31CrV3 vanadium steel combination spanners and ratchet wrenches, calibrated torque wrenches (DIN EN ISO 6789 Type II), socket sets, pliers and DREMOPLUS torque multipliers — to electrical contractors, industrial maintenance engineers and professional workshops across Europe from our Bulgaria distribution base.
Gedore has manufactured professional tools in Remscheid, Germany since 1919 and is one of Europe's leading hand tool manufacturers with over 22,000 products. The Gedore VDE 1000V insulated tool range covers screwdrivers, combination spanners, open-end spanners, ring spanners, adjustable wrenches, sockets and accessories — all insulated to EN 60900/IEC 60900 with dual Check-Tool insulation for live electrical work up to 1,000V AC. Dual-layer insulation (outer coloured warning layer over inner insulating layer) provides the visual alert system required by EN 60900 — any damage to the outer layer reveals the inner contrasting colour, warning the user that the tool requires inspection before continued use on live installations. The Gedore MaVo VDE screwdriver combines 1000V insulation with a built-in no-contact voltage tester and magnetic field tester — detecting AC electric fields and electromagnetic switching fields from a single 3-in-1 tool, eliminating the need to carry a separate voltage tester on the tool belt. All Gedore VDE tools are manufactured from 31CrV3 vanadium steel for maximum strength and crack resistance at the blade-handle interface — a critical failure point on inferior VDE screwdrivers under the high-torque demands of switchgear terminal tightening.
Gedore's combination spanner range is forged from 31CrV3 vanadium steel — a high-alloy chrome-vanadium steel that provides 20% greater tensile strength than standard CrV tool steel — with hot-forged heads ground to exact spanner size for maximum engagement contact with bolt heads. The Gedore No. 6 combination spanner (open-end + ring, 6–85 mm, 15° ring offset) is the standard professional spanner in metric and AF sizes. The Gedore No. 7 combination spanner (slender hollow shaft profile) provides superior access in confined spaces with the hollow double-T-beam shaft delivering exceptional warp resistance for its reduced cross-section. The Gedore 7R combination ratchet spanner integrates a fine-tooth ratchet in the ring end — enabling single-tool, single-position bolt tightening without withdrawing the spanner between turns, with a working angle as low as 5° for use in the most restricted access points. The UD profile ring geometry on No. 7 and 7R spanners applies force to the bolt flat faces rather than corners — preventing bolt-head rounding under high-torque tightening, critical for seized fasteners and stainless steel bolt heads that round easily with standard hexagonal ring profiles.
The Gedore torque wrench range covers 1–1,500 Nm in the standard click-type (releasing) format, calibrated and supplied with a traceable factory certificate to DIN EN ISO 6789:2017 Type II Class A — exceeding the ±4% standard tolerance with factory calibration to ±3% for enhanced accuracy in critical bolted joint applications. The Gedore Dremometer aluminium torque wrench (award winner at Eisenwaren Messe 2012) is the lightweight, compact click-type design for automotive, industrial and maintenance applications where tool weight affects user fatigue on production lines. The 1/4", 3/8", 1/2", 3/4" and 1" square drive variants cover the complete fastener size range from M3 instrument screws to M36 structural bolts. VDE-insulated torque wrenches (5–50 Nm range, 1000V rated, IEC 60900) cover controlled tightening of bus bar terminal bolts and switchgear connections where both torque accuracy and electrical insulation are simultaneously required — a combination not available from standard torque wrench manufacturers. The Gedore TorcoTronic III electronic torque wrench provides digital torque display, peak-hold measurement, clockwise/counterclockwise measurement, programmable target torque with audible and LED signal, and USB data export for quality management traceability documentation.
Gedore socket sets in 42CrMo4 chrome-molybdenum steel (higher impact toughness than standard CrV for socket applications) are available in 1/4" drive (4–14 mm hex), 3/8" drive (8–32 mm hex, 8–19 mm Torx, 8–19 mm bi-hex), 1/2" drive (10–50 mm hex) and 3/4" drive (22–85 mm) configurations for workshop, automotive and industrial maintenance applications. The Gedore 25 PK double-ended socket wrench series provides two hexagon drive ends on a single bar — combining two tools in one for maximum versatility in multi-size fastener environments. Deep socket variants accommodate stud bolt heads, threaded rod extensions and recessed fasteners inaccessible to standard-depth sockets. All Gedore sockets are phosphated or chrome-plated with ball-lock or pin-lock drive retention for secure socket-to-ratchet engagement in overhead and inverted fastener positions.
The Gedore DREMOPLUS ALU torque multiplier range (Families 1, 2 and 3) provides mechanical torque multiplication for high-torque bolting applications from 100 Nm to 8,000 Nm — where a standard torque wrench cannot reach the target torque due to handle length or operator strength limitations. The aluminium housing delivers the lowest weight-to-torque ratio of any mechanical multiplier, reducing operator fatigue in overhead, elevated and confined space flange bolting applications. DREMOPLUS multipliers are calibrated with traceable factory certificate and used for wind turbine tower flange bolting, industrial pump and compressor flange assembly, bridge bearing bolt installation and structural steelwork high-strength bolt tightening where controlled torque to ISO 4017/4014 specification is required. The Gedore Torque Solutions division extends the range to hydraulic and pneumatic torque wrenches (100–54,000 Nm) for the most demanding industrial bolting applications including pressure vessel flanges, large bore pipeline joints and offshore structural connections.
The complete Gedore professional workshop tool range covers combination pliers, long-nose pliers, diagonal cutting pliers, water pump pliers and Knipex-standard side cutters in vanadium steel with precision-ground cutting edges. Gedore screwdrivers (slotted, Phillips PH, Pozidriv PZ, TORX, hex) are manufactured with positive-fit blade-to-handle joint construction — preventing the blade from rotating within the handle under high breakout torque that causes inferior screwdrivers to deform at the connection. The ergonomic bi-material handle provides optimal grip in oily conditions and the required torque transfer for tight fasteners in panel wiring and switchgear assembly. Gedore tool sets — electrician sets, mechanic sets and maintenance sets — are available in blow-mould cases with individual tool sockets for organised storage and rapid tool identification during maintenance operations.
DAS Company provides access to current Gedore pricing for authorized B2B buyers across Europe. Product categories with available pricing include VDE 1000V insulated tool sets and individual tools (by type and size), combination spanner sets and individual spanners (by size range), torque wrenches (by Nm range and drive size, with ISO 6789 calibration certificate), socket sets (by drive size and piece count), DREMOPLUS torque multipliers (by torque range and family) and professional tool sets (by application type). Contact our sales team for project and volume pricing for site tool procurement and maintenance team tool fleet supply.
