DAS Company is an authorized Phoenix Sensors distribution partner, supplying the complete Phoenix Sensors OEM sensing portfolio — MEMS pressure transducers and sensors (PPT series), hermetically sealed pressure sensors, RTD and thermocouple temperature probes, differential pressure sensors, wireless Bluetooth pressure sensors (WEPS series) and NTC thermistors — to industrial OEM manufacturers, process engineers and measurement specialists across Europe from our Bulgaria distribution base.
Phoenix Sensors is a privately held US-based sensor company with over 25 years of engineering experience in MEMS (Micro-Electro-Mechanical Systems) sensing technology. Headquartered in the United States with US-based engineering and manufacturing, Phoenix Sensors designs, manufactures and distributes high-accuracy OEM pressure sensors, temperature sensors, wireless sensors, position sensors and humidity sensors for industrial, medical, aerospace, oil and gas and consumer markets. The combination of US-based engineering with SMT (Surface Mount Technology) automated manufacturing enables Phoenix Sensors to offer fast prototype-to-production workflows, high measurement accuracy (down to ±0.05% full scale), and custom ASIC-digitised MEMS elements that OEM customers cannot source from commodity sensor manufacturers. Phoenix Sensors is distributed through DigiKey for standard catalogue products and through authorised regional partners — including DAS Company for Europe — for OEM programme management, custom design and volume production supply.
The Phoenix Sensors PPT series covers the industrial pressure transducer range from low-cost analogue output to high-accuracy hermetically sealed units for demanding OEM applications. The PPT83 glass-fused industrial analogue pressure transducer provides 4–20 mA or 0–10V output with stainless steel wetted parts and process connections in ¼" NPT, G1/4" BSP and custom port configurations — covering hydraulic, pneumatic, HVAC and general industrial pressure measurement from vacuum to 10,000 PSI (690 bar). The PPT79 hermetically sealed pressure transducer provides temperature-compensated output in a fully sealed stainless steel housing for applications with high humidity, condensation, chemical exposure or vibration that would degrade a standard transducer. The PPS02T titanium pressure sensor provides maximum corrosion resistance for seawater, offshore, chemical and food processing OEM applications where standard stainless steel wetted parts are not sufficiently corrosion-resistant. The PPS03M miniature pressure sensor element (Ø10 mm) covers board-level and space-constrained OEM equipment integration where full-size transducer packaging cannot be accommodated.
Phoenix Sensors differential pressure sensors (PPT80 and PPT series wet-wet differential) measure pressure difference between two process points — covering flow measurement via orifice plate (inferential flow from ΔP), filter condition monitoring (pressure drop across filter indicating bypass risk), level measurement in pressurised tanks and leak testing in production end-of-line test rigs. The PPT80 high-temperature differential pressure sensor (up to 175°C) enables process differential pressure measurement in hot fluid, steam and oil and gas flow applications where standard differential pressure transducers degrade. Phoenix Sensors' custom ASIC temperature compensation is applied across the full operating temperature range — providing consistent ΔP accuracy that does not drift with process temperature changes, critical for accurate flow calculation in variable-temperature industrial processes.
The Phoenix Sensors PRTD10-1K-FG thin-film platinum RTD probe (1 kΩ at 0°C, Class B, DIN EN 60751) provides accurate resistance-temperature conversion for industrial temperature measurement in HVAC, food processing, pharmaceutical and laboratory instrument OEM applications. The thin-film element construction provides fast thermal response compared to wire-wound RTDs — reducing control system response lag in temperature-controlled process applications. The PTC-WT washer thermocouple provides surface temperature measurement of flanges, pipe joints, motor casings and mechanical components where immersion-type sensors cannot access the measurement point. The NTC thermistor range (2.8 kΩ at 25°C and custom resistance values) covers low-cost temperature measurement for HVAC zone control, battery thermal management, consumer electronics and medical OEM applications requiring high sensitivity at near-ambient temperatures.
The Phoenix Sensors WEPS wireless pressure sensor series provides battery-powered remote pressure and temperature monitoring without signal cable installation — enabling retrofit monitoring of existing equipment and monitoring of remote or hazardous access locations. The WEPS05 900 MHz long-range wireless pressure transmitter (up to 1,000 ft / 300 m line-of-sight range) connects to PS9W, PS9C or PS9U gateways for cloud data transmission — with battery life up to 2 years at one measurement per minute and 300 hours of onboard data storage for uninterrupted logging through communication blackouts. The Bluetooth wireless pressure transducers (WEPS Bluetooth series) connect directly to iOS and Android smartphones via the Phoenix Sensors mobile app — enabling immediate pressure reading, alarm threshold setting, data logging and zero-point calibration from a smartphone without a separate data logger or gateway. The wireless sensor app allows engineers to monitor multiple sensors simultaneously, set high/low pressure alarms and export logged data for analysis without dedicated data acquisition hardware investment.
The Phoenix Sensors PSW01 adjustable water pressure switch provides an electromechanical pressure switch output for pump control, system protection and pressure alarm applications in water supply, HVAC and irrigation systems. Adjustable setpoint and hysteresis allow single-unit calibration to application-specific switch-on and switch-off pressures without replacement. For OEM customers requiring custom sensor specifications — non-standard process connections, electrical connectors, output signal types, pressure ranges or environmental sealing — Phoenix Sensors provides custom OEM design services from concept through production, with US-based engineering support and prototype delivery timescales typically under 6 weeks for MEMS-based custom designs.
DAS Company provides access to current Phoenix Sensors pricing for authorized B2B buyers across Europe. Standard catalogue products are available for immediate delivery from stock; custom OEM programmes are managed through Phoenix Sensors' engineering team via DAS Company. Product categories with available pricing include PPT series pressure transducers (by pressure range, output type and process connection), differential pressure sensors (by ΔP range and temperature rating), RTD and thermocouple probes (by type and probe configuration), wireless WEPS Bluetooth and 900 MHz sensors and NTC thermistors. Contact our team for OEM programme enquiries, volume pricing and custom specification development.
